Description

Features: Adjustable ultrasonic frequency can repel different animal, such as birds. The solar outdoor pest repeller is weather proof and as such designed for outdoor use. Powered by solar panel, without messy power cord, low energy consumption and environmental-friendly. This is a pest repeller adopted sonic technology which is humane, eco-friendly, pollution free and high efficiency. The solar outdoor pest repeller is effective with the PIR function(Motion sensor), it will sense any movement and activate the system to emit sonic frequencies. Scope of application: It is used for bird repelling in fields and fruit forests, and is also suitable for bird repellent operations in other fields such as electricity, airports, warehouses, etc. Specification: Condition: 100% Brand New Material: Plastic Color: Dark Cyan Battery: 3pcs AA rechargeable 800mAh battery(Included) Power Cord: DC 4.5V 200mA(Not included) Solar Panel: 6V 50mA Working Current: <180mA Standby Current: <2mA Motion sensor activation: <15 feet 100 degree arc. Ultrasonic frequency: 15KHz-25KHz(Adjustable) Effective range: 5000 sq. feet Size: approx. 17 x 14 x 11.5cm Weight: approx. 365g Package Included: 1 x Ultrasonic Repeller Usage Method: 1. Mount the unit with screws on an area with sufficient direct sunlight. For better performance, it is recommended to place the unit at least 3 feet above the ground for optimum range. Make sure that the speaker is facing the area you want covered. 2. Turn the frequency dial to the desired animal you want repel. Different frequencies will repel different animals. Some frequencies will repel more than one animal. 3. Turn the unit ON by pressing the ON/OFF button once. Once pressed, the LED will illuminate red and activate the system if sense any intruder movement. Recharging the battery: If there is no sunshine or it rains continuously for a long several days and the capacity of the batteries becomes very low, it is recommended to recharge the unit by using the power cord(Not included). There is a DC jack located at the back of the switch. Pull out the jack cover, insert the plug of the power cord into the DC jack.